Guide
Herringbone SPC in Dubai: Cost per Sq Ft, Design Tips and When to Choose It
Herringbone SPC flooring in Dubai costs AED 9.5 to 10.5 per sq ft at BestFloor including skirting and 5% VAT. When the pattern suits your villa, and how it differs from straight planks.
By BestFloor, Dubai23 October 2026
Herringbone SPC at BestFloor costs AED 9.5 to 10.5 per sq ft including skirting and 5% VAT in the displayed range, versus AED 7.5 to 8.5 for 5 mm straight planks and AED 8.5 to 9.5 for 6.5 mm. The pattern suits open living rooms and villa hallways that can carry a stronger floor graphic. Final pricing follows a free site visit; small jobs have a minimum of AED 2,500 incl. VAT.
This guide is about herringbone cost and design. For pattern differences, see herringbone vs chevron.
Key facts
- Herringbone SPC: AED 9.5 to 10.5 per sq ft (incl. skirting and 5% VAT in range)
- 5 mm straight SPC: AED 7.5 to 8.5 per sq ft
- 6.5 mm straight SPC: AED 8.5 to 9.5 per sq ft
- Minimum job: AED 2,500 incl. VAT
- Warranty: 20-year manufacturer + 2-year BestFloor installation
- Calculator: cost calculator
- WhatsApp: +971 58 671 8066
What is herringbone SPC?
Herringbone lays rectangular planks in a staggered zigzag so the end of one plank meets the side of the next. It is a floating click floor like straight SPC, waterproof in the plank, and usually installed over existing tiles when the base is sound.
BestFloor project: herringbone SPC in a hallway.
BestFloor also installs chevron and straight layouts. Chevron is priced individually.
How much does herringbone cost compared with straight SPC?
Use the table below for BestFloor's indicative ranges. Stairs and skirting are included in the per sq ft conversation for flooring jobs; the site visit confirms the final figure.
| Layout | Indicative AED per sq ft | Notes |
|---|---|---|
| 5 mm SPC straight | 7.5 to 8.5 | Standard thickness line |
| 6.5 mm SPC straight | 8.5 to 9.5 | Premium thickness line |
| Herringbone SPC | 9.5 to 10.5 | More cutting and lay time |
| Chevron SPC | Priced individually | Ask on WhatsApp |
BestFloor project: herringbone SPC continuing into a kitchen.
Run your area on the cost calculator. A typical 4-bedroom villa example of about 2,150 to 2,370 sq ft is discussed in the SPC cost guide for straight and mixed scopes.
When does herringbone suit a Dubai villa or apartment?
Choose herringbone when you want the floor to be a visible design layer, not a quiet backdrop. It works especially well in:
- Open-plan living and dining
- Long villa hallways that benefit from directional movement
- Homes with simple furniture where the floor can carry texture
- Light or mid oak colours that keep the pattern from feeling heavy
BestFloor project: herringbone SPC layout detail.
Be cautious in very small rooms with busy furniture: a strong pattern can feel crowded. Lighter colours help. Read more colour advice in the floor colour guide.
Does herringbone need a flatter subfloor?
Yes, more than straight planks. Pattern layouts show dips and high spots more clearly. On the site visit we check tile flatness, loose or hollow tiles and grout depth. Most homes still take SPC over tiles without demolition. Details: SPC over tiles and installation process.
How long does herringbone installation take?
Expect more lay time than the same area in straight planks. As a baseline, a one-bedroom apartment is often about one day for standard SPC, and a villa around 2,150 sq ft about two to three days. Herringbone can extend that depending on area and cutting. The site visit sets the schedule.
How do I order herringbone with BestFloor?
- Estimate with the cost calculator (select herringbone)
- Browse planks on floors
- Message WhatsApp with area in sq ft and photos
- Free site visit with samples
- Install with matching skirting and stairs as scoped
BestFloor is German-managed and works mainly in Dubai, also in Abu Dhabi.
FAQ
How much does herringbone SPC cost at BestFloor?
Herringbone SPC is AED 9.5 to 10.5 per sq ft including skirting and 5% VAT in the displayed range. Straight 5 mm SPC is AED 7.5 to 8.5 and 6.5 mm is AED 8.5 to 9.5 per sq ft. Final quote after a free site visit. Minimum job AED 2,500 incl. VAT.
Why does herringbone cost more than straight planks?
Herringbone takes longer to lay and involves more cutting, so labour is higher than a straight layout of the same plank family.
Can herringbone SPC go over existing tiles?
Yes, when tiles are flat and sound. Pattern floors show unevenness more than straight planks, so the site visit checks levels carefully.
Is herringbone the same as chevron?
No. Herringbone uses rectangular planks with square ends in a staggered zigzag. Chevron uses angled ends that meet in a point. See our herringbone vs chevron guide for the full comparison. Chevron is priced individually.
What warranty comes with herringbone SPC?
The same as other BestFloor SPC: 20-year limited residential manufacturer warranty from Ecofloor, plus BestFloor's 2-year installation warranty.
How do I estimate my herringbone budget?
Use the cost calculator and select herringbone, or message WhatsApp at +971 58 671 8066 with your area in sq ft.